Monte Carlo simulation-based probabilistic assessment of DG penetration in medium voltage distribution networks

With the growing use of renewable energy sources, Distributed Generation (DG) systems are rapidly spreading. Embedding DG to the distribution network may be costly due to the grid reinforcements and control adjustments required in order to maintain the electrical network reliability. Deterministic load flow calculations are usually employed to assess the allowed DG penetration in a distribution network in order to ensure that current or voltage limits are not exceeded. However, these calculations may overlook the risk of limit violations due to uncertainties in the operating conditions of the networks. To overcome this limitation, related to both injection and demand profiles, the present paper addresses the problem of DG penetration with a Monte Carlo technique that accounts for the intrinsic variability of electric power consumption. The power absorbed by each load of a medium voltage network is characterized by a load variation curve; a probabilistic load flow is then used for computing the maximum DG power that can be connected to each bus without determining a violation of electric constraints. A distribution network is studied and a comparison is provided between the results of the deterministic load flow and probabilistic load flow analyses.     

Nonlinear robust dual-loop control for electro-hydraulic load simulator

This paper investigates on the high performance torque control of electro-hydraulic load simulator (EHLS). In order to suppress actuator׳s motion disturbance, a nonlinear robust dual-loop control scheme is developed, which consists of a open-loop nonlinear velocity feed-forward compensator and a closed-loop nonlinear deterministic robust torque controller. The main function of the open-loop compensator is to decouple actuator׳s active motion disturbance, whereas the torque loop controller aims at guaranteeing the dynamics performance of tracking torque reference. Besides actuator׳s motion disturbance, both the nonlinearity characteristics and friction problem of the EHLS system are taken into consideration in this paper. The effectiveness of the developed method are verified through comparative co-simulations and experiments.     

Large eddy simulation of a 660 MW utility boiler under variable load conditions

Large eddy simulation (LES) has become a promising tool for pulverized coal combustion with the development of computational fluid dynamics (CFD) technologies in recent years. LES can better capture the unsteady features and turbulent structures of coal jet flame than Reynolds averaged Navier Stokes (RANS). The coal-fired power plants in China are now required to be operated in a wide load range and quickly respond to the electric grid. The boiler performance of variable loads should be evaluated in terms of flow, heat transfer, and combustion processes. In this paper, LES was applied to simulate a 660 MW ultra-supercritical boiler under BMCR (boiler maximum continue rate), 75%THA-100, and 50%THA-100 conditions. The predicted gas velocities agree well with the thermal calculation and the temperature error is less than 130 K. The simulation results show that the operation load has significant effects on the boiler performance. It is also proved that LES can provide guidance for the design and operation of advanced coal-fired boilers.     

Uplift capacity of horizontal anchor plate in geocell reinforced sand

The paper investigates the uplift performance of horizontal anchor plate in geocell reinforced sand through a series of model tests. It is noted that the unreinforced anchor plate undergoes a clear failure at a displacement of about 3% of its width, whereas with the provision of geocell and a layer of geotextile right below the geocell mattress significantly increases the uplift capacity by about 4.5 times higher than that of unreinforced sand and could sustain anchor displacement of more than 60%. Results indicates that the geocell mattress by virtue of its rigidity distributes the uplift load in the lateral directions to a larger area, thereby reducing the stress in the overlying soil mass and hence increases the performance of anchor plate system. The provision of the additional geotextile layer right below the geocell mattress is found to be very effective in increasing the stiffness as well as load carrying capacity of anchor plate system. The optimum size (i.e., width and length) of geocell mattress giving adequate load carrying capacity of anchor plate is found to be 5.4 times of anchor width (5.4B). The comparison of model tests results with 3D numerical analysis shows good agreement, indicating that the proposed model is able to capture the uplift load-displacement behaviour of geocell reinforced anchor plate system.     

Syrah grape skin valorisation using ultrasound-assisted extraction: Phenolic compounds recovery,antioxidant capacity and phenolic profile

The influence of ultrasound power (1000–3000 W/L), citric acid concentration (0–3%) and solid:liquid ratio (1:5–1:15) on the phenolic compounds recovery and antioxidant capacity of Syrah grape skin extracts were evaluated. Total phenolic compounds varied from 6485 to 11732 mg gallic acid/100 g and monomeric anthocyanin content from 453 to 685 mg malvidin-3-glucoside/100 g. The antioxidant capacity measured by ORAC and ABTS methods ranged from 230 to 516 μmol Trolox/g and from 442 to 939 μmol Trolox/g, respectively. The most suitable conditions chosen for extraction, within the studied ranges, were 3000 W/L of power, 2.5% citric acid and solid:liquid ratio of 1:15. The extraction yield was satisfactory, with a recovery of 59% of the quantified phenolic compounds, with only 3 min of processing. Ultrasound was considered a suitable method as compared to the conventional extraction, improving the extraction of phenolic acids and facilitating their release.     

The validation and further development of a multidimensional cognitive load scale for virtual environments

Measuring cognitive load is important in virtual learning environments (VLE). Thus, valid and reliable measures of cognitive load are important to support instructional design in VLE. Through three studies, we investigated the validity and reliability of Leppink's Cognitive Load Scale (CLS) and developed the extraneous cognitive load (EL) dimension into three sub-scales relevant for VLE: EL instructions, EL interaction, and EL environment. We investigated the validity of the measures using the Partial Credit Model (PCM), Confirmatory Factor Analysis (CFA), and correlations with retention tests. Study 1 (n = 73) investigated the adapted version of the CLS. Study 2 describes the development and validation of the Multidimensional Cognitive Load Scale for Virtual Environments (MCLSVE), with 140 students in higher education. Study 3 tested the generalizability of the results with 121 higher education students in a more complicated VLE. The results provide initial evidence for the validity and reliability of the MCLSVE.     

Effects of external light load on posture and foot pressure distribution in young adults: A pilot study

Holding an asymmetrical load, like a rucksack, grocery bag, or travel backpack, is a part of daily and occupational activities. This pilot study was aimed to determine the effects of light, asymmetrical, handheld load on the body posture and foot pressure distribution in young adults. Thirteen young volunteers, free of any injury or pain, took part in the study (aged 21.53 ± 1.10 years). All the study participants were right-handed. An additional load (4 kg, placed in the rucksack) was asymmetrically held in each hand while standing still. For evaluation of the posture and foot pressure distribution, the investigation focused on three positions, i.e., no-load, a rucksack in the right hand, a rucksack in the left hand. We used a surface topography system and force platform for evaluation of the body posture and foot pressure examination, respectively. The results showed that the main changes in the body posture caused by an external load application manifested in trunk imbalance. The trunk was shifted in the direction opposite to the load. Trunk imbalance changes were statistically significant in all three comparisons (p = 0.001). Interestingly, changes in the rotations and lateral deviation seem to be dependent on the hand dominance. Greater foot pressure was observed on the loaded limb (p < 0.01), and highly significant differences were noted between the left and right foot in both loaded postures (p < 0.001). Further research needs to be done to check if lateralization is connected with body posture while holding an external load.     

蛋类礼盒包装结构的缓冲性能研究

目的研究蛋类礼盒包装结构的缓冲性能。方法以蛋类尺寸为基础,建立可发性聚乙烯(expandable polyethylene. EPE)缓冲单元结构和组合结构,进行静态仿真分析和实验验证,比较结构在形状、叠合层数、组合形式等参数变化时的载荷与位移。结果结构层数变化相同时,单元结构的极限载荷从143N增加到236 N,组合结构的极限载荷从224 N增加到476 N,均呈近线性增长。结论蛋类礼盒包装中,组合结构的承载能力优于单元结构,通过单元结构的组合,可满足不同蛋类的包装要求。     

等级反馈蚁群算法求解成品油二次配送问题

针对成品油二次配送路径优化问题，提出了一种可变成本与动态载荷相关的评价指标。考虑蚁群算法求解路径优化问题的高效性，设计了一种等级反馈蚁群（HFAC）算法。采用局部距离等级策略代替基本蚁群算法的随机选取；利用较优（较差）个体对其所在路线进行正（负）反馈调整信息素浓度；对最优路线的子路线进行末端优化调整。通过15组不同类型算例进行仿真实验表明，HFAC算法在成品油二次配送路径优化中优于基本蚁群算法。     

低开销负载均衡的改进型TORA协议

针对无线传感器网络拓扑快速变化、链路易拥塞断开，存在路由开销大、负载不均衡、网络生命周期短等问题，提出低开销负载均衡的改进型TORA（TORA-p）。通过定义网络变化率参数，自适应调整互联网封装协议（IMEP）中OBM包的最大重发次数，减少不必要的路由维护开销；同时，结合MAC层信息，定义链路可用性优化选路方式，自动平衡网络负载，避免关键路径和节点负载过重而过早死亡和断开。使用truetime2.0平台设定特定的仿真环境，对TORA-p算法的性能进行了详细比较分析，结果表明：TORA-p均衡了网络负载，提升了网络生命周期，同时也减少了路由开销和延时，展现出了较好的数据传输能力。